Madisound was established in 1972, and we accumulated an enormous library of raw loudspeaker driver specification sheets. In 201,7, we created the Madisound PDF Library to collect these PDFs in one easy-to-search location.
In addition to loudspeaker driver specification sheets, we are uploading PDFs of publications by and about speaker brands, cabinet enclosure plans, and free passive crossover designs.
Need assistance? Try the search box first, but if you can’t find what you’re looking for here, don’t hesitate to contact Madisound Speaker Components. Madisound provides speaker design assistance and speaker replacement suggestions with each sale.
From the Library
H1288 + H1216 + H0737 3way Passive Crossover Design
Passive Crossover Design for H1288 + H1216 + H0737 3way Crossover design for Seas H1288 woofer, H1216 midbass, and H0737 tweeter (3way configuration) Anechoic (flat response). Woofer: 2.8 cubic foot vented with single straight vent 3″ x 6″ length. Midrange: 0.2 cubic foot sealed. Additional Notes: Crossover points about 300 Hz and 4.0 kHz. Nominal
W22EX-001 x2 + W12CY-001 x2+ T25CF-002 3way Passive Crossover Design
W22EX-001 x2 +W12CY-001 x2 + T25CF-002 3way Passive Crossover Design Sease Excel W22EX-001 x2 + W12CY-001 x2 + T25CF-002 3way WWMTM Passive Crossover Design Woofers: 3.2 cubic foot vented, single straight port 3″ x 5″. Midranges: 0.25 cubic foot sealed Note: Woofer in reverse polarity. Large value midrange cap and two large hi-pass caps. Crossover
18W-8531G x2 + R2904-7000 MTM Passive Crossover Design
18W_8531G x2 + R2904-7000 MTM Crossover Design for 18W-8531G x2 in parallel + R2904-7000, MTM configuration No designated box alignment. Additional Notes: Clean design with low parts count and single hi-pass cap. Some padding in hi-pass circuit.
Madisound stocks these brands and more.
