W22EX001x2 +W12CY001x2 + T25CF002 3way Passive Crossover Design

W22EX001x2 +W12CY001x2 + T25CF002 Passive Crossover Design

Crossover Design W22EX001 x2 +W12CY001 x2 + T25CF002 3way with double  woofers and midranges (WWMTM)

Woofers: 3.2 cubic foot vented, single straight vent 3″ x 5″

Midranges: 0.25 cubic foot sealed

Additional Notes: Crossover points about 250 Hz and 3.2 kHz. Strong nominal output ~ 90 dB. Two large value hi-pass caps. Single very large value midrange cap. Some padding in hi-pass circuit. Note the woofer is in reverse polarity relative to the mid and tweeter.

SB34NRX75-6 + P17WJ00 + D27TG35 3way Passive Crossover Design

SB34 + P17 + D27 Passive Crossover Design

Crossover Design for SB34NRX75-6 woofer, Scan P17WJ00 6.5″ mid-bass, and old Vifa D27TG35 tweeter in 3way configuration.

Woofer: 2.7 cubic foot vented, single straight port 3″ x 6″

Midrange: 0.7 cubic foot sealed chamber.

Additional Notes: Crossover points about 300 Hz and 2.5 kHz. Nominal output ~ 86-87 dB. Two large value hi-pass caps and high value midrange cap. Significant padding in hi-pass circuit. Note the woofer is in reverse polarity relative to the mid and tweeter.

SB17NAC35-8 + XT25BG6004 Passive Crossover Design

SB17NAC35-8 + XT25BG6004 Passive Crossover Design

Crossover Design for SB Acoustics SB17NAC35-8 6.5″ woofer + Peerless XT25BG6004 tweeter

No box alignment specified.

Additional Notes: Low crossover point about 2.0 kHz. Nominal output ~ 86-87 dB. Two large value hi-pass caps. Significant padding in hi-pass circuit.

 

SB17MFC358 x2 + D26069220 Passive Crossover Design

SB17MFC358 x2 + D26069220 Passive Crossover Design

Crossover Design for two SB17MFC35-8 in parallel and the D2606-9220 tweeter, MTM

No specified box alignment.

Additional Notes: Crossover point about 2.3 kHz. Very high nominal output ~ 93-94 dB. Two large value hi-pass caps. Significant padding in hi-pass circuit. -0- resistor value indicates optional padding to taste.

 

Satori MW16Px2 +D3004-6620 MTM Passive Crossover Design

Satori MW16Px2 +D30046620 Passive Crossover Design

Crossover design for two Satori MW16P mid-bass in parallel and the Scan Speak D30046620 in MTM configuration

No box alignment specified.

Additional Notes: Crossover point about 2.0 kHz. High nominal output ~ 92 dB +. Very clean design with low parts count and single hi-pass cap. Minimal padding in hi-pass circuit. 0- resistor value indicates optional padding to taste.