Madisound was established in 1972, and we accumulated an enormous library of raw loudspeaker driver specification sheets. In 201,7, we created the Madisound PDF Library to collect these PDFs in one easy-to-search location.
In addition to loudspeaker driver specification sheets, we are uploading PDFs of publications by and about speaker brands, cabinet enclosure plans, and free passive crossover designs.
Need assistance? Try the search box first, but if you can’t find what you’re looking for here, don’t hesitate to contact Madisound Speaker Components. Madisound provides speaker design assistance and speaker replacement suggestions with each sale.
From the Library
15W-8434G x2 + D2608-9130 MTM Passive Crossover Design
(2x) 15W_8434G and D2608_9130 Passive Crossover Design Crossover Design for (2x) 15W-8434G in parallel and D2608-9130 HDS tweeter, MTM configuration Box alignment: 0.3 cubic foot ported with single straight vent 2″ x 5″. Additional Notes: Flat response. Low parts count and single hi-pass cap. Minimal padding in hi-pass circuit. 15awg Steel Laminate inductor designated on
Seas W15CY-001 and T25CF-001 2-way Design
Seas W15CY-001 and T25CF-001 2-way Design This design uses a single inductor in series with the woofer, with some additional parallel circuitry. The high pass has two capacitors, and film caps would be a good choice there. No box or cabinet is specified.
P17WJ00 + T25CF002 Passive Crossover Design
Passive Crossover Design for P17WJ00 + T25CF002 Crossover Design for P17WJ00 woofer and T25CF002 tweeter No box alignment specified. Additional Notes: Low crossover point about 1.9 kHz. Nominal output ~ 87-88 dB. Clean design with two large value hi-pass caps. Some padding in hi-pass circuit.
Madisound stocks these brands and more.
