A few my DIY projects "J&N"

[Jororaitchev]

And I am approaching to the measurement of the internal volume:
I measure the weight of the my vented inner construction - 3.5 kg.
-The amount of water is 42 l. in the box; the average value relative to the density of MDF is 0.75 kg. of a cubic decimeter,3,5/0,75=4,7l, 42-4,7l= 37.3l more than what's needed - what's next?
The problem is that my investor likes the vision of the column.The decrease in volume must occur inside the construction of the cabinet.This sends the project in a more initial phase,we have a new requirement for the project, another W18 EX001.The old project stayed in the past ...

[Jororaitchev]

I think it's time to post the other " DIY" materials, thank you!

[Jororaitchev]

After measuring the volume of my cabinet I received 43 l - I deduct the weight of the internal ribbing and I received 37 l - much more than the required volume.The problem is that my investor likes the vision of the column.The decrease in volume must occur inside the construction of the cabinet.This sends the project in a more initial phase,we have a new requirement for the project, second W18 EX001,the old project stayed in the past ...

With the new interior design, the volume is 35.2 l
Preprocessing of the internal ribbing, I can now start collecting the cabinet;
Everything is handmade, no "CNC" machine is used.

[Jororaitchev]

I think it's time to post the other " DIY" materials, thank you!

[Jororaitchev]

J&N saraund speakers 2, 1/2 way

Frequence Range; 33-25000 Hz;
Long term Max Power; 200 W
Crossover Frequency;• 2800 Hz
Impedance; 4 Ohms
Sensitivity; 90 db SPL
Cabinet Volume; 31 L
Gross weight I without stand /; 27kg.
This is the project of the rear speakers, will finish it with "Bird's eye view". There will be a sequel ...sometime..

Joro Raitchev
Sofia- Bulgaria

[Jororaitchev]

There's still a lot of work on the stands.
I show you a few pictures of the front speaker bases, the rear speaker stands will look like the same;


Always been a problem with the MDF, especially when we have a multilayer construction. Over time, individual parts are beginning to show up - all of this is the result of improper processing. Soon I will show you how to deal with this problem.

[Jororaitchev]

A question to the moderators of this forum, without excuse - why there is no discussion among the members?
This is a big forum , and there is no links between fans,why?Everything happens slowly. because it passes through the approval of the administrators and the idea of direct contact is lost. Who does this need?

[SciFiDogSD]

Some changes are being worked on by staff....

[Jororaitchev]

Some changes are being worked on by staff....

Happy New Year!
I do not know, what the problem with your staff is trying to do is, but things are a bit irritating-inert!! When there is no direct communication opportunity in your "Forum", it is anything but a forum- sad, I do not understand why you have a format like this at all?
Joro
P.S.
If i create you problems, just say it and I will not bother you anymore, please!

[Charleen]

The problem is that my investor likes the vision of the column.The decrease in volume must occur inside the construction of the cabinet.This sends the project in a more initial phase,we have a new requirement for the project, another W18 EX001