 Morel Woofers and Subwoofers
- All 5", 6" and 9" woofer models incorporate
- 3" large External Voice Coils
- Gold plated terminals
- High power
- Uniflow aluminum diecast chassis:
- Supreme Coppersleeve Woofer - Carbon fibre/Rohacell composite conehandling ratings
- Uniflow™ woofers have cast frames with large windows to reduce reflections and to provide a solid platform for the Hybrid™ magnet system with 3" diameter voice coil.The new frame design has retained the shallow profile of the Morel woofer, allowing for a depth of only 2.75"! The shallow depth makes this speaker a good choice for in-wall applications, autosound or as a side firing woofer in a slender tower speaker.The voice coil and motor are also kept cool by ventilation from a large opening in the back of the frame.You can expect a warm and fast sound with the Morel Uniflow™.
Supreme Woofer Line |
| Ø 6” |
SCW636 |
160x69 mm
6.3x2.71” |
6 |
40 |
150 |
87 |
Elite Woofer Line |
| Ø 4” |
EW428 |
118.5x56 mm
4.66x2.20” |
8 |
62 |
150 |
87 |
| Ø 5” |
EW536 |
143x65 mm
5.63”x2.55” |
6 |
45 |
150 |
88 |
| Ø 6” |
EW638 |
160x69 mm
6.3x2.71” |
8 |
39 |
150 |
87 |
| Ø 5” |
ECW536 |
143x65 mm
5.63x2.55” |
6 |
45 |
150 |
86 |
| Ø 6” |
ECW638 |
160x69 mm
6.3x2.71” |
8 |
39 |
150 |
88 |
Classic Advanced Woofer Line |
| Ø 4” |
CAW428 |
118.5x50 mm
4.66x1.96” |
8 |
74 |
150 |
88 |
| Ø 5” |
CAW538 |
143x65 mm
5.63x2.55” |
8 |
49 |
150 |
86 |
| Ø 6” |
CAW638 |
160x69 mm
6.3x2.71” |
8 |
43 |
150 |
86 |
| Ø 9” |
CAW938 |
222x76 mm
8.74x2.99” |
8 |
29 |
150 |
86 |
Classic Woofer Line |
10cm (4")
Woofer |
MW113 |
118x58mm
4.64x2.28" |
8 |
72 |
150 |
87 |
| MW114S |
118x58mm
4.64x2.28" |
8 |
80 |
150 |
87 |
13cm (5")
Woofer |
H5.1 |
145x65mm
5.70x2.56" |
8 |
43 |
150 |
88 |
| MW143 |
145x65mm
5.70x2.56" |
8 |
52 |
150 |
89 |
| MW144 |
142.5x60mm
5.5x2.36" |
8 |
52 |
150 |
88 |
| HU521 |
145x68mm
5.7x2.56" |
8 |
46 |
160 |
88 |
| HU531 |
146x68mm
5.7x2.56" |
8 |
46 |
180 |
86 |
16cm (6")
Woofer |
MW164 |
160.5x67mm
6.3x2.63" |
8 |
48 |
150 |
86 |
| MW166 |
160x67mm
6.3x2.63" |
8 |
46 |
150 |
86 |
| MW167 |
160x65mm
6.3x2.56" |
8 |
44 |
150 |
88 |
| MW168 |
160x58mm
6.3x2.36" |
8 |
44 |
150 |
88 |
| H6.1 |
160x65mm
6.3x2.56" |
8 |
44 |
150 |
89 |
| HU631 |
160.5x68mm
6.51x2.57" |
8 |
44 |
180 |
88 |
| HU621 |
160.5x68mm
6.51x2.57" |
8 |
43 |
160 |
90 |
20cm (8")
Woofer |
MW265 |
220x69mm
8.7x2.7" |
8 |
30 |
150 |
89 |
| MW266 |
220x69mm
8.7x2.7" |
8 |
29 |
150 |
89 |
| MW267 |
220x69mm
8.7x2.7" |
8 |
25 |
180 |
89 |
| H8.1 |
220x69mm
8.7x2.7" |
8 |
32 |
180 |
90 |
| HU9.1 |
220x69mm
8.7x2.7" |
8 |
30 |
160 |
89 |
25cm (10")
Woofer |
MW1075 |
263x80mm
10.33x3.14" |
8 |
29 |
180 |
89 |
| MW1077 |
263x80mm
10.33x3.14" |
8 |
28 |
200 |
89 |
| H10.1 |
263x80mm
10.33x3.14" |
8 |
25 |
200 |
90.5 |
Ultimate Subwoofer Line |
| Ø 12” |
UW1258 |
305x154.3 mm
12x6.07” |
8 |
21 Hz |
800W |
87 |
| Ø 10” |
UW1058 |
263x148.5 mm
10.35x5.84” |
8 |
26 Hz |
500W |
85.8 |
Improvements to New Models
| n/a |
SCW636 |
Supreme Coppersleeve Woofer, 6" diameter, 3" External voice coil, 6Ω, New design carbon fibre/Rohacell sandwich one piece cone, Uniflow aluminum die cast chassis, Neodymium/Ferrite Hybrid vented magnet motor, high grade magnets, linear impedance copper sleeve, 5mm Xmax, low Qts, low Fs |
A front doped carbon fibre matt and rear untreated carbon fibre layer, separated by Rohacell, create an ultra stiff/self damping sandwich structure. By using best quality composite cone material available in the market, the SCW636 is our new top quality reference 6" woofer, exhibiting superb technical parameters and sound quality. Underhung option (SCM634) is part of the Midrange units range. |
Elite Coppersleeve Woofer/Elite Woofer range -
Neodymium/Ferrite Hybrid vented magnet motor systems |
| MW167 |
ECW638 |
Elite Coppersleeve Woofer, 6" diameter, 3" External voice coil, 8Ω, New design injected Damped Polymer Composite, (DPC) one piece cone, Uniflow aluminum die cast chassis, Neodymium/Ferrite Hybrid vented magnet motor, high grade magnets, linear impedance copper sleeve, 6mm Xmax, low Qts, low Fs |
Based on former top quality 6" Neolin unit, the Elite Coppersleeve unit, extends the performance by means of higher linear excursion, fresh design injected DPC cone, fluent aluminum chassis, and copper insulated motor for linear impedance.Easy qualitywise design match-up with Elite Tweeters. |
| MW143 |
ECW536 |
Elite Coppersleeve Woofer, 5" diameter, 3" External voice coil, 6Ω. New design injected Damped Polymer Composite, (DPC) one piece cone, Uniflow aluminum die cast chassis, Neodymium/Ferrite Hybrid vented magnet motor, high grade magnets, linear impedance copper sleeve, 5.5mm Xmax, low Qts, low Fs |
Based on former top quality 5" Neolin unit, the Elite Coppersleeve unit, extends the performance by means of higher linear excursion, fresh design injected DPC cone, fluent aluminum chassis, and copper insulated motor for linear impedance. Easy qualitywise design match-up with Elite Tweeters. |
| HU631 |
EW638 |
Elite Coppersleeve Woofer, 6" diameter, 3" External voice coil, 8Ω, New design injected Damped Polymer Composite, (DPC) one piece cone, Uniflow aluminum die cast chassis, Neodymium/Ferrite Hybrid vented magnet motor, high grade magnets, 6mm Xmax, low Qts, low Fs |
The Aluminum Uniflow chassis, whice was originaly introduced, in the former HU line, is maintained for the upgraded EW line. Most ECW features (high Xmax, new cone) apply, except the exclusion of the copper sleeve. Easy qualitywise design match-up with Elite Tweeters. |
| HU531 |
EW536 |
Elite Coppersleeve Woofer, 5" diameter, 3" External voice coil, 6Ω, New design injected Damped Polymer Composite, (DPC) one piece cone, Uniflow aluminum die cast chassis, Neodymium/Ferrite Hybrid vented magnet motor, high grade magnets, 5.5mm Xmax, low Qts, low Fs |
The Aluminum Uniflow chassis, whice was originaly introduced in the former HU line, is maintained for the upgraded EW line. Most ECW features (high Xmax, new cone) apply, except the exclusion of the copper sleeve. Easy qualitywise design match-up with Elite Tweeters. |
| n/a |
EW428 |
Elite Woofer, 4" diameter, 2.1" External voice coil, 8Ω,New design stamped Damped Polymer Composite, (DPC) one piece cone, Uniflow stamped steel chassis, Neodymium/Ferrite Hybrid vented magnet motor, high grade magnets, 4.5mm Xmax, low Qts, low Fs |
Currently our top 4" model, this addition to the EW line, includes a powerful yet compact Neodymium motor, and 4.5mm high linear excursion. Easy qualitywise design match-up with Elite Tweeters. |
Classic Advanced Woofer range -
Double Ferrite magnet systems (except for 4" model) |
| MW265 |
CAW938 |
Classic Advanced Woofer, 9" diameter, 3" External voice coil, 8Ω, New design stamped Damped Polymer Composite, (DPC) one piece cone, Uniflow aluminum die cast chassis, double Ferrite vented magnet motor, high grade magnets |
The Aluminum Uniflow chassis further improves the classic model's performance. New technical design resulted in a more balanced performing unit, enabling flexible implementation. Easy qualitywise design match-up with Classic Advanced Tweeters. |
| MW166
MW168 |
CAW638 |
Classic Advanced Woofer, 6" diameter, 3" External voice coil, 8Ω, New design stamped Damped Polymer Composite, (DPC) one piece cone,Uniflow aluminum die cast chassis, double Ferrite vented magnet motor, high grade magnets |
The Aluminum Uniflow chassis further improves the classic model's performance. New technical design resulted in a more balanced performing unit, enabling flexible implementation. Easy qualitywise design match-up with Classic Advanced Tweeters. |
| MW144 |
CAW538 |
Classic Advanced Woofer, 5" diameter, 3" External voice coil, 8Ω, New design stamped Damped Polymer Composite, (DPC) one piece cone, Uniflow aluminum die cast chassis, double Ferrite vented magnet motor, high grade magnets |
The Aluminum Uniflow chassis further improves the classic model's performance. New technical design resulted in a more balanced performing unit, enabling flexible implementation. Easy qualitywise design match-up with Classic Advanced Tweeters. |
| n/a |
CAW428 |
Classic Advanced Woofer, 4" diameter, 2.1" External voice coil, 8Ω, New design stamped Damped Polymer Composite, (DPC) one piece cone, Uniflow stamped steel chassis, single Neodymium vented magnet motor |
New 4" model, this addition to the Classic Advanced line, includes a powerful yet compact Neodymium motor, and 4.0mm high linear excursion. Easy qualitywise design match-up with Classic Advanced Tweeters. |
Summary of New Features
New feature marked with: √O
| SCW 636 |
ECW 638 |
ECW 536 |
EW 638 |
EW 536 |
EW 428 |
CAW 938 |
CAW 638 |
CAW 538 |
CAW 428 |
| Uniflow diecast aluminum chassis |
√O |
√O |
√O |
√ |
√ |
|
√O |
√O |
√O |
|
| Hexatech aluminum voice coil |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
| EVC (external voice coil) |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
| Carbon fibre/Rohacell sandwich cone |
√O |
|
|
|
|
|
|
|
|
|
| Injected DPC cone |
|
√O |
√O |
√O |
√O |
|
|
|
|
|
| Stamped DPC cone |
|
|
|
|
|
√ |
√ |
√ |
√ |
√ |
| Neodymium/Ferrite Hybrid magnet |
√ |
√ |
√ |
√ |
√ |
√ |
|
|
|
|
| Double Ferrite magnet |
|
|
|
|
|
|
√ |
√ |
√ |
|
| Neodymium magnet |
|
|
|
|
|
|
|
|
|
√ |
|
|
