I have 3 pairs for sell. One pair has been in the cabinet and used about 10 hours (or as I say almost broken in).
The other 2 have never been used.
If you are in Houston I have 3 sets of cabinets which are unfinished 3/4 MDF with 1 1/4 baffles. The speaker recess will need to be cut in 2 sets of the cabinets. They are all ported with flared tubes (to the original specs). The one set that has the recess cut for drivers is rounded over with a 3/4" bit on all edges. There are also 4 neodymium magnets mounted in the baffle for a grill. They have been sealed in already, and you could use a tack to hold drills, or another magnet if you need gorilla tact. No grills included.
I can cut the driver recess if needed. I usually veneer first then cut after, so they are not cut on 2. The rounded over I planed on painting, so was already done. I'll let the cabinets go for $40 a pair.
I'll let each set go for $70 plus shipping.
If someone wants all 3 sets and cabinets I'll let it all go for $280 plus shipping or will meet you in Houston Area.
If anyone is interested I have;
(18) Vifa TC14WG49-08 speakers,
(8) Vifa D25AG-05-06 Tweeters, and,
(42) Crossover boards
I'll sell a pair of speakers, one TC14WG49-08 and one D25AG-05-06, plus, a crossover for $75 including a tracking number. TC14WG49-08 speakers seperatly for $35 including a tracking number, Boards for $30 including a tracking number.
Reply With Quote
Bookmarks