|
Tymphany LAT500 16/16 Ohm Subwoofer
Use as 16 ohm stereo or wire coils in parallel for 8 ohm mono or wire in series for 32 ohm mono.
The LAT500 provides the power of two 10" subwoofers in a sleek tube shaped transducer.
Specifications are taken with both coils wired in parallel for an 8 ohm load.
| Nominal Impedance |
8 Ohm (16/16 ohm)
|
Free Air Resonance |
28 Hz |
| DC Resistance (Re) |
8.1 Ohm |
Sensitivity (2.83V/1m) |
89 dB |
| Voice Coil Inductance (Le) |
4 mH |
Mechanical Q-factor (Qms) |
9 |
| Effective Piston Area (Sd) |
525 cm2 |
Electrical Q-factor (Qes) |
0.4 |
| Voice Coil Diameter |
38 mm |
Total Q-factor (Qts) |
0.4 |
| Voice Coil Height |
19 mm |
Moving Mass incl. air (Md) |
160 g |
| Air Gap Height |
8 mm |
Force Factor (BL) |
23 Tm |
| Linear Coil Travel (peak) |
5.5 mm |
Equivalent Volume (Vas) |
81 Liters |
| Magnet Gap Flux Density |
- T |
Compliance (Cms) |
0.21 mm/N |
| Magnet Weight |
2.72 Kg |
Mechanical Loss (Rm) |
3 kg/s |
| Net Weight |
- Kg |
Rated Power Handling |
250 Watt |
Dimensions:
7" wide by 16" long
3" deep
2.9" high
Enclosure Suggestions:
Sealed box of 0.9 cubic feet with F3 of 55Hz. In car with cabin gain of 6dB has F3 of 34Hz.
Vented box of 2.2 cubic feet with a 3" diameter vent by 9.5" long for an F3 of 33Hz.
Bandpass box:
Vented chamber of 0.75 cubic feet with 3" diameter vent by 11.5" long
Sealed chamber of 1.0 cubic feet
Woofer fires into vented chamber
-3dB frequency response is 33Hz and 95Hz, no crossover needed.
|
