|
Fountek NeoCD2.0 ribbon tweeter
84mm x 164mm Black Rectangular Metal Flange
Features:
Super strong Neodymium magnets
Build-in impedance conversion transformer
Effective from 1,200Hz upwards due to the large diaphragm area and low self-resonance.
Thin enforced sandwich ribbon diaphragm guarantees a high degree of signal fidelity and broad frequency response.
Low distortion factor, good power-handling capabilities, high linear impedance and amplitude frequency response and the broad frequency response range.
Flat impedance from 1,000 to 40,000Hz
Factory matched pairs: Although these are sold each, when you order two you will receive a matched pair.
Specifications
Ribbon material: Enforced sandwich
Ribbon mass: 34mg
Ribbon dimension: 8mmX120mmX0.02mm
Ribbon area: 960square millimeters
Gap flux: 0.6 Tesla
Gap height: 3mm
Impedance: 7 Ohm
DCR: 0.02 ohm
Sensitivity: 98dB/M/W
Frequency response: 1,200~40,000Hz
Resonance frequency: 300Hz
Power handling: 20W Normal, 50W Max
Recommended crossover frequency: 2,000Hz / 2nd-Order
Warning:
Ribbon tweeters should always be used with a passive crossover!
Do not test without a capacitor.
Tweeters are repairable at Madisound for a very reasonable price. Call us to make arrangements.
Also available, the larger NeoPro5i.
|
