|
|
|
|
| $23.30 for each | | 10+ | $20.97 |
Madisound# MD20-B4
|
MD20-B4 baffle cut for Scan-speak 182mm woofer, 104mm tweeter and 2" flared port.
Woofers would include but are not limited to:
- 18S/8531G
- 18W/4531G
- 18W/8531G
- 18W/16531G
Tweeter would include but are not limited to:
- D3004/6600
- D2904/7100
- R2904/7000
These tweeters fit, but need to use at least 1/8" gasket to make flush:
- Scan-speak D2904/9800
- Scan-speak D2905/9300
- Scan-speak D2905/9500
- Scan-speak D2905/9700
- Peerless 810921
- Morel MDT20
- Vifa XT25TG30
- Vifa DX25TG05
- Vifa D27TG35
- Vifa D27TG45
The MDF used in these baffles is so dense that the pressure fit protrusions on the 2" flared ported won't compress into the wood. You need to cut these off with a razor blade before gluing the port into place. Glue should be applied to the inside edge of the baffle hole, not the recessed part, so that glue doesn't squirt out when you stick the port in. Ports are not included with the baffle.
|
