|
|
|
|
| $23.30 for each | | 10+ | $20.97 |
Madisound# MD20-B3
|
MD20 baffle cut for two Morel 160mm woofers and 104mm tweeter.
Use on its side as a center channel or standing up as an MTM.
Possible woofers include, but are not limited to:
- Morel MW164
- Morel MW166
- Morel MW167
- Morel MW168
- Morel HU621
- Morel HU631
- Morel SW638
- Morel EW638
- Morel CAW638
Tweeters include but are not limited to:
- Morel ET338-104
- Morel ST104
- Morel MDT20
Vifa 104mm tweeters work, but stick up about 1mm.
The MDF used in these baffles is so dense that the pressure fit protrusions on the 2" flared ported won't compress into the wood. You need to cut these off with a razor blade before gluing the port into place. Glue should be applied to the inside edge of the baffle hole, not the recessed part, so that glue doesn't squirt out when you stick the port in. Ports are not included with the baffle.
|
